Industry Solutions
AEROSPACE & AVIATION STORAGE
Telescopic Rack Solutions
Aerospace & Aviation Storage Challenges
Aerospace manufacturing demands the highest standards of material handling precision. Aircraft skin panels, wing sections, fuselage components, and composite layups are extremely high-value parts where even minor surface damage can result in rejection and costly rework. Traditional storage methods using floor stacking or basic racks create unacceptable damage risks and inefficient space utilization in facilities where every square meter costs a premium.
Materials We Store
Industry-Specific Challenges
- Value: A single aircraft skin panel can cost $50,000-500,000. Storage damage is extremely costly and causes production delays.
- Size: Wing panels and fuselage sections can be 3-6 meters wide. Standard racks are too narrow for these oversized components.
- Cleanliness: Aerospace facilities require contamination-free storage. Rust particles, oil, or debris from storage systems can compromise part integrity.
- Compliance: AS9100/NADCAP quality standards require documented material handling procedures and damage-free storage verification.
- Access Frequency: Production schedules require specific panels at specific times. Random access to any stored item without disturbing others is essential.
How Tcrack Solves These Challenges
ZERO-DAMAGE HANDLING
Padded arm surfaces and overhead crane lifting eliminate all contact damage. No forklift forks touching high-value aerospace components.
WIDE PANEL STORAGE
TE Series unlimited width accommodates oversized aerospace panels that won’t fit in standard racks. Custom widths up to 6m+.
CLEAN ROOM COMPATIBLE
Powder-coated or stainless steel construction meets aerospace facility cleanliness requirements. No rust, no contamination.
TRACEABILITY
Each arm level stores specific part numbers. Barcode/RFID integration available for automated inventory tracking and AS9100 compliance.
Recommended Configuration
| Parameter | Recommendation |
|---|
| Rack Series | TC Series (heavy loads) or TE Series (wide materials) |
| Load Capacity | 1,000-5,000 kg per arm (based on material weight) |
| Arm Levels | 3-6 levels (optimized for material mix) |
| Drive System | Motorized recommended for >20 cycles/day |
| Surface Treatment | Powder coating (indoor) or hot-dip galvanizing (outdoor/corrosive) |
Need a Aerospace & Aviation Storage Solution?
Get a free warehouse layout design tailored to your specific materials and operations.
Get Free Layout Design →
